Logitech Rally Plus
Rally Camera
Rally Display Hub
Rally Table Hub
Rally Speaker (x2)
Rally Mic Pod (x2)
Remote control
USB Type C to USB Type C
USB Type A to USB Type B
CAT6A Ethernet cable
HDMI Type A (x2)
A/C cables (x2)
Power Supplies (x2)
Documentation
Dimensions
Rally Camera
Height: 7.19 in (182.5 mm)
Width: 5.98 in (152 mm)
Depth: 5.98 in (152 mm)
Rally Speaker
Height: 4.06 in (103 mm)
Width: 17.68 in (449 mm)
Depth: 3.15 in (80 mm)
Rally Mic Pod
Height: 0.83 in (21 mm)
Width: 4.01 in (102 mm)
Depth: 4.01 in (102 mm)
Rally Display Hub
Height: 1.57 in (40 mm)
Width: 8.11 in (206 mm)
Depth: 7.0 in (179 mm)
Rally Table Hub
Height: 1.57 in (40 mm)
Width: 6.93 in (176 mm)
Depth: 5.43 in (138 mm)
Technical Specifications
RIGHTSENSE TECHNOLOGIES
RightLight with WDR
Low-light compensation
Video noise reduction
Low-light saturation optimization
Renders natural skin tones for each participant on camera
Reduces backlighting and glare without darkening the entire image.
RightSight
Human figure detection
Auto-frame participants at meeting start
Auto-frame participants on-demand
Auto-reframe participants during meetings
RightSound
Machine learning AI trained to distinguish human speech from other sounds
AEC (Acoustic Echo Cancellation)
VAD (Voice Activity Detector)
Background noise suppression
Auto-level loud and soft voices
RightSound Mic Matrix
Very low distortion broadside beamforming algorithm steers the factory-paired microphones directly at the talker for the best voice pickup and noise reduction
Supports up to 56 acoustic beams (8 per Rally Mic Pod) to lock onto the active talker
Beam focus refresh rate: 8ms (125 times/second)
Anti-Vibration Suspension
A patent-pending suspension system decouples the speaker module within the external enclosure, virtually eliminating the vibrations that can travel through walls, stands, and tables. This improves the echo cancelling performance of Rally Mic Pods, while ensuring that video images remain clear and steady, even at high volume levels and when zoomed in.
Peak-limiting algorithm eliminates even momentary speaker clipping to prevent distortion
Rally Camera
Zoom: 15x HD zoom (5x optical + 3x digital)
Pan: 180° (±90°)
Tilt: 140° (+50° / -90°)
Field of View
Diagonal: 90°
Horizontal: 82°
Vertical: 52°
Total Room Coverage: 262° wide x 192° tall (field of view + pan and tilt)
Resolutions @ 30fps: 4K Ultra HD, 1440p, 1080p, 900p, 720p, and SD
Resolutions @ 60fps: 1080p, 720p
RightLight Technologies: Wide Dynamic Range (WDR), low-light compensation, video noise reduction, low-light saturation optimization
Privacy: Lens parks at -90° in sleep mode for assured privacy
Rally Mic Pod
Pickup Range: 23 ft (7m) diameter
Four omnidirectional microphones forming eight acoustic beams
AEC: Acoustic Echo Cancellation
VAD: Voice Activity Detector
Background noise suppression
Mute button with LED status indicator
Captive 9.6 ft (2.95m) 12-pin cable
Daisy chain up to 7 Rally Mic Pods
Frequency Response: 90Hz – 16kHz
Sensitivity: >-27 dB +/-1dB @ 1Pa
Microphone data rate: 48 kHz
Recommended # of participants
Rally (one Mic Pod): 16
Rally Plus (two Mic Pods): 16
Additional participants per Mic Pod: 6
Recommended participants for Rally with 7 Mic Pods: 46
Rally Speaker
High-performance 3″ (76mm) driver with rare-earth magnet
Patent-pending suspension system eliminates vibration-induced camera shake and audio interference
Mini XLR cable connects to Rally Display Hub for both signal and power
Speaker volume 95dB SPL @1W, 100dB SPL @7.5W, both +/-2dB at ½ meter
Sensitivity: 95+/-2 dB SPL at ½ meter
Distortion: 200Hz–300Hz <2.5%, 300Hz–10kHz < 1%@7.5W
Sampling rate: 48 kHz
Rally Table Hub
Single CAT6A cable connection to Rally Display Hub (16.4 ft / 5m cable included, supports customer-supplied cables up to 164 ft (50 m)
Hub 5 m cable included, supports customer-supplied cables up to 50 m
Active speaker detection: analyzes audio from up to 7 Mic Pods and 56 beams every 8 ms
12 Pin connector for Rally Mic Pod
HDMI Type A passthrough to Display Hub (x2)
USB Type C
USB Type A (reserved for future capability)
USB Type B (connects to meeting room computer)
RJ45 (reserved for future capability)
Power input
Rally Display Hub
HDMI Type A: (x2) (connects to displays)
USB C (connects to Rally Camera)
USB Type B (connects to meeting room computer)
RJ45: connects to Table Hub
Mini XLR: x2
Powers one or two Rally Speakers
Power input
Remote Control
RF remote control (line of sight not required)
CR2032 batteries (included)
Cables / Power
Camera to Display Hub
6.5 ft (2m) USB 3.1 Type C to USB Type C 3.1
Conference Room Computer to Display or Table Hub
6.5 ft (2m) USB 3.1 Type A to USB Type B
Display Hub to Table Hub
16.4 ft (5 m) CAT6A Ethernet cable (supports customer-supplied cables up to 164 ft (50 m)
Display Hub to Speaker (x2)
9.6 ft (2.95 m) Mini XLR (supports customer-supplied extension cables up to 9.8 ft (3 m)
Conference Room Computer to Displays (x2)
6.5 ft (2m) HDMI A
Mic Pod
9.6 ft (2.95m): Hardwired with 12 pin connector
Power Outlets to Power Supplies (x2): 4.9 ft (1 m)
3.2 ft (1 m)
Power Supplies to Table Hub / Display Hub (x2)
4.9 ft (1.5 m)
Accessories
RALLY MOUNTING KIT
Rally Mounting Kit with cable retainers: (x2) and mounting brackets for camera, speakers (x2), and hubs (x2)
Rally Mic Pod
Deploy up to 7 Rally Mic Pods for greater audio coverage in larger rooms
MIC POD MOUNT
Anchors mics and hides cables for a finished look
Rally Mic Pod Hub
Connect 1-3 Rally Mic Pods (or additional hubs) for placement flexibility and under-table cabling
Rally Speaker
Add a second Rally Speaker for larger rooms
|
||||||||||||
| Dimensions | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
